compatibel met Chevrolet Cobalt 2005-2010 w/z Camber Plates schroefset ophanging Kit Lowering Kit

Compatible for Chevrolet Cobalt 2005-2010 w/z Camber Plates Coilover Suspension Kit Lowering Kit

Dit MaXpeedingRods onderdeel is geschikt voor Chevrolet-toepassingen waar vermeld. Controleer altijd onderdeelnummer, bouwjaar, motorcode en pasvorm voordat je bestelt.

Voordelen

• Gebaseerd op originele MaXpeedingRods productinformatie
• Geschikt voor directe vervanging of prestatie-upgrade

Toepassing, specificaties en compatibiliteit

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.Toepassing Geschikt voor Chevrolet Cobalt Base/LS/LT/LTZ/Sport/SS 2005-2010 Specificaties Top mounts: Pillow ball top mount with camber plate

Adjustable camber plate: Only front

Damping: 24 levels rebound damping adjustable

Spring rate Front: 7 kg/mm (392 lbs/in)

Spring rate Rear: 7 kg/mm (392 lbs/in)

Spring length Front: 200mm

Spring length Rear: 160mm

Adjustable height: lowering 1-3 inch

Coilover overall length Front: 345mm-465mm

Coilover overall length Rear: 385mm-420mm

Shock type: Twin tube

Spring preload: 7-10 mm

Color: Golden Package includedproduct included: 2 piece front + 2 pieces rear + 2 sway bar end links + 2 spanners + hardwares as pictures show Dimension Size: 63*51*21 cm

Weight: 24.38 kg Kenmerken Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance.

A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.

Twin-Tube structure allows sufficient stroke within the shock absorber.

Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation.

Separate height adjustment does not affect damper stroke.

Height can be adjusted with coilovers installed on the vehicle.

High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.

Height Adjustment tools included.

Camber plate top mounts help to eliminate the need for a separate camber kit.

Pillow ball top mount - It improves the steering feel and response.

Most pieces in our Coilover systems, including mounts, collars and spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable and rust resistant components.

Full rebuildable.